Safety Instructions - flir Lorex LNZ32P12S Manual De Instrucciones

1

Safety Instructions

• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity, and voltage levels
noted in the Technical Specifications.
• Camera is rated for outdoor use and is weatherproof when properly in-
stalled. Camera is not intended for submersion in water. Installation under
a sheltered environment is recommended.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of intense
light.
• Use only the supplied regulated power supply. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.
• Make sure to install the camera in a location that can support the camera
weight. If mounting the camera on a drywall surface, you must drill at least
2 of the mounting screws through a wooden stud. See 4.2 Installation (In-
door/Outdoor), page 9 for complete installation instructions.
• Make sure there are no live electrical cables in the area where you plan to
mount the camera.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any-
thing other than water to clean the dome cover, as chemicals such as ace-
tone can permanently damage the plastic.
#LX400020; r.41770/42005; en-US
1