Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A(mm)
B(mm)
760
50 mini
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid
accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock during
working, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from the bot-
tom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these
Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to temperature not
below 150ªC, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an temperature of 90ªC.
Cautions
1.
The ceramic cooker hob must be installed by qualified personnel or technicians. We have professionals at
your service. Please never conduct the operation by yourself.
2.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
3.
The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhance its
reliability.
4.
The wall and induced heating zone above the work surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
7.
This ceramic can be connected only to a supply with system impedance no morethan 0.427 ohm. In case
necessary, please consult your supply authority for system impedance information.
C(mm)
D
20 mini
Entrada de Aire
34
INDUCTION COOKER
TPI028210MD
E
Salida de Aire 5 mm
Publicidad
Tabla de contenido
