Basic Operation - Rockford Fosgate Polaris PMX-P2 Operación Manual

Settings
UPDATE - Press the encoder button to update the firmware.
Follow the instructions on the screen when updating.
THEME
To adjust the THEME, press the encoder to access the feature.
Rotate the encoder button to select the desired THEME (DAY,
NIGHT).
DAY – Screen will have a White background with Black
Lettering.
NIGHT – Screen will have Black background with White
lettering.
FACTORY DEFAULT
AUDIO – Press the encoder button to access. Rotate the
encoder button to select YES/NO. Selecting YES will reset your
unit back to factory default settings.
SYSTEM - Press the encoder button to access. Rotate the
encoder button to select YES/NO. Selecting YES will reset your
unit back to factory default settings.

Basic Operation

TURNING THE UNIT ON / OFF
Press and hold the SRC (Power) button to turn the unit ON or
OFF
ADJUSTING THE VOLUME
Rotate encoder knob left or right to desired volume level (0-40).
The current volume level will be displayed during adjustment.
ADJUSTING THE SUBWOOFER OUTPUT
Press the SUB + or SUB- buttons to adjust the output level
(0-20).
ADJUSTING THE SCREEN BRIGHTNESS
Press the SCREEN BRIGHTNESS button to adjust the brightness
level. There are two brightness levels.
SELECTING A SOURCE TO PLAY
Press the SRC button to show the different source options (FM
TUNER>AM TUNER>WB TUNER>USB>BLUETOOTH>PANDORA).
Use the rotary encoder or press the SRC button to scroll
through sources.
Tuner Operation (FM/AM/WB)
To operate, use the rotary encoder to select the tuner source
you want to listen to (FM>AM>WB).
To switch between AUTO and MANUAL SEEK modes, press and
hold either the FWD or REV buttons.
To AUTO SEEK stations, press the FWD and REV buttons. To
MANUAL SEEK stations, press and hold the FWD and REV
buttons to tune to the desired frequency.
To MUTE the TUNER, press the PLAY/PAUSE button.
FM BAND SETTINGS
To access the FM BAND SETTINGS, press the MENU when
using the FM TUNER source. This will give you access to
the settings specific to the FM TUNER (FM>PRESETS>ADD
PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Press the encoder button to access the PRESETS list. Using this
feature allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Press the encoder button on the ADD PRESETS option. You will
need to be on both the station and PRESET group you want to
add first (FM1>FM2>FM3). Using this feature allows you to save
stations to the unit. Once selected, use the rotary encoder to
select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Press the encoder button on the REMOVE PRESETS option. You
will need to be under the PRESET group you want to adjust first
(FM1>FM2>FM3). Using this feature allows you to remove saved
stations on the unit. Once selected, use the rotary encoder
to select the PRESET number (1-6) of the station you want
removed.
FM
Press the encoder button to access the FM PRESET options
(FM1>FM2>FM3). Using this feature allows you to have separate
tuner preset groups to choose from. Use the rotary encoder
button to scroll through the TUNER groups and press to select
the group.
AUTO STORE
Press the encoder button to access the AUTO STORE function.
You will need to be under the PRESET group you want to adjust
first (FM1>FM2>FM3). This feature automatically stores presets
on the unit. It will stop when presets 1-6 are set. Select the next
PRESET group and repeat to fill next set.
LOCAL
Press the encoder button to access the LOCAL options. Once
selected, use the rotary encoder to select ON or OFF. The local
option tunes to nearby radio stations with sufficiently strong
signals for good reception. In areas where reception is poor,
switching to distance tuning enables the unit to tune in to more
distant stations. Distance tuning is the default.
AM BAND SETTINGS
To access the AM BAND SETTINGS, press the MENU when
using the AM TUNER source. This will give you access to
the settings specific to the AM TUNER (AM>PRESETS>ADD
PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Press the encoder button to access the PRESETS list. Using this
feature allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Press the encoder button on the ADD PRESETS option. You will
need to be on both the station and PRESET group you want
to add first (AM1>AM2). Using this feature allows you to save
6