Mounting The Product - afriso FloCo-Top-1K Manual De Instrucciones

5.3

Mounting the product

 Verify that the ambient temperature is not exceeded.
 Verify that the product is not mounted the product on top of or next to a
non-insulated boiler part, above opening dampers at furnaces or to the
flue gas pipe.
 Verify that the float housing points vertically to the top.
LEAKS AT PRODUCT
Do not use hemp or Teflon tape for sealing.
• Verify that you use a screwed pipe connection as per DIN 3852 with cylindri-
cal thread (G thread) and seal it with a flat gasket or with suitable glue.
Failure to follow these instructions can result in equipment damage.
Mounting
A
NOTICE
1. Mount the product to the
boiler casing using the
enclosed bracket and four
self-tapping screws.
2. Use the bracket as a tem-
plate when screwing in the
self-tapping screws. The
arrow (A) must point
upwards).
FloCo-Top-1K
EN
15