OTR-Installation-M1.fm Page 14 Wednesday, September 27, 2000 4:03 PM
• Place cut portion of Carton B on top of the Carton A. At this point, cut Area
C as shown and turn flaps upward.
Area C
• After you have placed cut portion of Carton B as shown above, bend Area C
and secure carton with tape as shown below.
Area C
Tape
• Place microwave oven on top of carton B and A as shown. Remove tape and
lift up Area C. Thread power supply cord through the power supply cord
hole in the bottom of the upper cabinet.
NOTE: Lift flaps in Area C to help prevent microwave oven from slipping off
of carton.
Area C
WARNING: Be careful when lifting microwave oven. It is recommended that
two people lift and install this microwave oven. Failure to use more than
one person could result in personal injury.
14
Carton B
Carton A
Carton B