QVSP Operator's Manual
DUST SOCK CARE AND MAINTENANCE
Purpose:
The dust sock acts as a secondary filter lowering the amount of dust that escapes the
bag.
Dust socks are to be used in dry and dusty conditions ONLY. Using the dust sock in
damp or wet conditions may damage the dust sock and decrease the effectiveness of the
filter.
The dust sock may be installed by simply attaching the mating Velcro strips between the bag
and the dust sock. Over time the dust sock will begin to fill with dust during use. Periodically
remove the dust sock, empty the loose dust out and clean the sock. For a light clean, simply
.
shake the sock, for a deep clean, see below. To remove the sock, simply separate the Velcro
Dust Sock Care Information:
DO NOT STRIKE THE BAG WITH OR AGAINST OBJECTS
DO NOT SNAG THE BAG
6"-12"
(152mm-305mm)
LIGHTLY CLEAN WITH COMPRESSED AIR ONLY, FROM THE
DO NOT GET WET
OUTSIDE IN. KEEP THE NOZZLE 6-12 INCHES FROM FABRIC
Dust Socks are normal replaceable wear items. Replacement P/N- 831282
Part No 831500
Form No F021213A
7