Publicidad
Enlaces rápidos
Write purchased model number here. Retain
these instructions for future use.
Escriba aquí el número del modelo comprado.
Conserve estas instrucciones para usarlas en el futuro.
Inscrivez le numéro de modèle ici. Conservez
ces instructions pour consultation.
B66311-6032-WH
?
We're here to help! Please do not return your product to the store. For questions, installation support,
missing or replacement parts, contact us first.
¡Estamos aquí para servirle! Por favor, no devuelva el producto a la tienda. Para hacer preguntas,
obtener ayuda con la instalación, piezas que le falten o de repuesto, contáctenos primero.
Nous sommes là pour vous aider! Ne retournez pas votre produit au magasin. Si vous souhaitez
obtenir des renseignements, du soutien pour l'installation ou des pièces de rechange ou si des pièces
sont manquantes, communiquez d'abord avec nous.
www.deltafaucet.com
DIRECT-TO-STUD BATHTUB WALL SET
CONJUNTO DE PARED DE TINA
DIRECTA AL MONTANTE
ENSEMBLE MURAL POUR BAIGNOIRE FIXÉE AUX
MONTANTS
40204
40044
www.deltafaucet.com
1-800-355-2721
consumercare@deltafaucet.com
1
B66513-6030-WH
B66513-6032-WH
03/20/18
101336
101336 Rev. A
Publicidad
Manuales relacionados para Delta B66311-6032-WH
Resumen de contenidos para Delta B66311-6032-WH
- Página 1 Escriba aquí el número del modelo comprado. Conserve estas instrucciones para usarlas en el futuro. Inscrivez le numéro de modèle ici. Conservez ces instructions pour consultation. B66311-6032-WH 40204 B66513-6030-WH B66513-6032-WH 40044 We’re here to help! Please do not return your product to the store. For questions, installation support, missing or replacement parts, contact us first.
- Página 2 REQUIREMENTS FOR SUCCESSFUL INSTALLATION REQUISITOS PARA UNA INSTALACIÓN EXITOSA EXIGENCES À RESPECTER POUR RÉUSSIR L’INSTALLATION KNOWLEDGE BASE: Framing Plumbing • Confirm that your model will fit in intended location and plumbing fixtures are located where required before beginning installation. • Walls and sub-floor must be solid, plumb, and square. •...
- Página 3 TOOLS AND MATERIALS REQUIRED • 2” x 6” and 2’ x 4” lumber for additional wall studs • Lumber for bracing • Rags or padding to protect product during bracing NOTE: It is recommended to install insulation. HERRAMIENTAS Y MATERIALES NECESARIOS •...
- Página 4 (5 x 10.16 x 145 cm) (5 x 10.16 x 144.8 cm) 1 11/16" 13/16" (2.1 cm) (4.3 cm) 60" 60" (152.4 cm) (152.4 cm) 40044 B66311-6032-WH B66513-6032-WH 15 3/8" 14 5/8" 14 5/8" 15 3/8" 14 5/8" 14 5/8" 15 3/8" 15 3/8" 8"...
-
Página 5: Importante
Tub Door Installation Only 40204 13/16" (2.0 cm) 40044, B66311-6032-WH 2 3/16” (5.6 cm) 57" (144.8 cm) B66513-6030-WH B66513-6032-WH 1 11/16” (4.3 cm) 2 1/2" (6.4 cm) NOTE: Install Tub Door Nailers It is recommended to install insulation on exterior walls. - Página 6 Dry Fit Panels Dry Fit Panels • Drill 3/16” holes at all stud locations on top flanges (1). • Check panels for gaps and alignment. • Drill 3/16” holes along side flanges (2) at five locations equal • Check that vertical side panel flanges (1) are straight and distance apart.
- Página 7 Back side of panel. Parte posterior del panel Face arrière du panneau. Prepare for Plumbing Fixtures Apply Fire Retardant Pad • Measure and mark location for plumbing fixtures on the front • Remove backing from self-adhesive pad (1). of the side panel. Drill pilot holes. •...
- Página 8 Preparing for Back Panel Secure Back Panel • Press back panel in place. Apply adhesive to studs up to the pencil line (1). • Secure top flanges (1) to studs with 1-1/4” panhead or roundhead screws. Apply sealant along back of base. NOTICE Do not use drywall screws to secure flanges to wall studs.
- Página 9 Preparing for Side Panels Secure Side Panels • Slide the side panel into gap between wall and back panel, pressing Apply sealant along side of base and back panel. firmly into corner and against studs. • Push in and down until panel tops are even and curved area on Apply adhesive to studs.
- Página 10 Brace Wall Panels Apply Sealant • Protect surface of wall (1) where it will contact braces. • Apply sealant to all seams. • Install temporary braces (2) to hold side panels tight against studs while adhesive dries. • Install plumbing fixtures and fittings per manufacturer’s instructions. •...
- Página 11 CARE AND CLEANING We recommend that you clean your acrylic bathing product with mild detergents. Use a terry cloth towel, soft cloth, or sponge. Avoid using abrasive scrubbing pads, steel wool, or sponges. After cleaning, rinse thoroughly with water. NOTICE When using drain cleaner or clog remover, rinse thoroughly with water.
- Página 12 SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES elect to refund the purchase price (the return of the product may be required at Delta Faucet Com- (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PROD- pany’s option).