Recycling Mode - GE CGP6010I Manual De Uso Y Cuidado

Recycling Mode

• Remove the retention valve (fig. 1).
• Using the two screws (fig. 2), attach the
plastic smoke deflector against the wall,
flush with the ceiling for support. Be care-
ful to centre the deflector in relation to
the vertical line drawn on the wall (fig. 2).
• For models up to 700 mm, add the 2
struts supplied in the pocket (A/fig. 2).
• Slide one end of the flue over the deflec-
tor and the other end over the motor out-
let (fig. 3).
• Prepare the ventilation shaft, taking care
to place the vents upward so that they
are visible (B/fig. 3).
• Attach the assembled chimney (C/fig. 3)
to the hood and lift the upper portion to
adjust the height, then screw it to the
smoke deflector (A/fig. 3) using the two
screws (F/fig. 3).
A. Smoke Deflector
B. Vents
C. Telescopic Ventilation Shaft
D. Flue
E. Motor Bracket
F. Chimney Holding Screw
44
A
A
B
D
E
fig. 1
fig. 2
F
C
fig. 3