EAS ELECTRIC EMC2000SW1 Manual De Instrucciones página 28

Key
A.SET: gear setting key
Display screen
1 Gear 1
2 Gear 2
3 Gear 3
4 Gear 4
5 Gear 5
Display
For the first power-on, the display screen (including the key light) will be displayed in full for 3s,
and then the gear in the middle displays the state of running
Display of normal running
On the occurrence of a failure, the corresponding LED light will give a combined display of failure
code (loop display);
Where there is no failure, the LED light will display the current running gear of the refrigerator.
Gear setting
The gear will be changed once every time when you press the key SET. Then, the refrigerator will
run under the setting value after 15s.
Gear 1
Fast cool function
Enter: Circulating modulation rapid cooling mode
Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2 .
Exit: 1. Operate 150min under the rapid cooling mode
2. Temperature adjustment can exit from the rapid cooling mode
Temperature control of freezing chamber
When ambient temperature is high in summer, the temperature shall be in the range from
LD
prevail.
When ambient temperature is low in winter, the temperature shall be in the range from
LDER
Gear 2
LD
Gear 3 Gear 4
LDER
8
Gear 5
LD
LDER
V.1