Ford TrafficPro II Instrucciones De Instalación página 50

US
Installation Instructions
Initial TRAFFIC PRO II Start-Up
1. Following the installation of the system, reconnect the vehicle
battery. DO NOT insert a navigation CD.
2. Start the engine.
3. Press the ON button located on the TRAFFIC PRO II faceplate.
4. Enter the five-digit security code using the first through the seventh
multifunction keys.
• If an incorrect code number is entered one or two times, the Enter
Code Number prompt for re-entering the code will appear on the
display. If incorrectly entered a third time, Code Wait will appear
and the unit will be blocked for 10 minutes. Three further incorrect
entries will lock the unit for an additional 10 minutes.
• The locking time will elapse only while the unit is on.
• Keep the Code Card in a safe place apart from the vehicle to
prevent unauthorized use of this system. Attach the sticker
provided to the inside of the vehicle's windshield or a window.
• If Traffic Pro II is disconnected from the power supply, it will be
theft-protected upon reconnection. After turning the ignition key,
the display will show Enter Code Number.
Initial Sensor Test and Global Positioning System
(GPS) Start-Up
1. Press the first and the last multifunction keys at the same time. The
initial sensor test and GPS menu will appear on the display.
2. Drive the vehicle forward and rearward for the speed signal and
reverse signal function test.
• The number displayed under Speed does not represent miles or
kilometers per hour.
• The number should change only while the vehicle is moving.
Under all other conditions, the number should not change.
• The direction of the arrows will change when the vehicle's
gearshift position is changed to reverse.
• NOTE: If the numbers under Speed do not change, check the
speed signal hook-up and connection in Socket A. If the direction
of the arrows do not change, check the reverse signal hook-up
and connection in Socket A. (See page 7 for wiring diagram.)
3. The GPS receiver of your TrafficPro II requires an initial download of
the most current GPS satellite information (almanacs). To do this,
park the vehicle in an open area away from buildings, ensuring the
GPS antenna has a clear view to the sky.
• NOTE: Leave the system turned on.
Subject to correction and technical modifications
2L2Z-18814-NAV
50/71
SK2L2J-10E945-AA ©
Copyright Ford 2002