Uld-400-T Transmitter - Amprobe ULD-400 Serie Manual De Usuario

3. KIT COMPONENTS

3.3 ULD-400-T Transmitter

The ULD-400-T Transmitter is included with the ULD-420 kit and is optional for the ULD-410 kit.
When a leak is not pressurized sufficiently the Receiver will not be able to detect it. In these
circumstances, the ULD-400-T Transmitter can be used to emit an ultrasonic sound that
the Receiver can read. The Transmitter is programmed with three signal levels for precise
pinpointing of leaks.
Speaker
LEDs:
high/
medium/low
signals
Low battery
indicator
Figure 3.3: ULD-400-T Transmitter
6
Signal level "+/-"
button
On/Off button