Ninka Qanto R4 Instrucciones De Montaje página 14

14
Corner strip NOT in scope of supply
19.
20.
21.
22.
!
WARNING
Step 19:
Drill the holes for fixing the cornice
Step 20:
The corner bar is not included in the scope
of supply. Create this bar. The dimensions
depend on the planning dimensions. The
corner bar can have different designs.
Screw the accompanying cabinets only to the
corner bar. Do NOT screw it to the corner cabinet.
!
CAUTION
Select the length of the fastening screws
for the bars in such a way that they do not
poke through the cabinet, as this will
damage the unit and may lead to injury.
Step 21:
Drill the holes to attach the accompanying
cabinets to the corner cabinet.
Step 22:
Screw the accompanying cabinets to the
corner cabinet. Do NOT screw it to the
corner cabinet.
Qanto_Id_A4_00000.50.065050_US
EN