Ninka Qanto R4 Instrucciones De Montaje página 8

"
1,69
Step 12:
Determine the installation situation; a variety of options is available. 8 options have been
illustrated as examples (see L1-L4 and R1-R4)
Step 13:
If no spacer bars are included in the scope of supply, you must create them yourself.
A
The width is calculated from the planning dimensions
B
The width is calculated from the planning dimensions
The maximum length of the bars amounts to 22.44".
Step 14:
In case of a Qanto installation position of L1-L4 or R1-R4, you must mount the spacer bars
as shown in the figure opposite. Pay attention to the position of the lifting column! Select the
length of the fastening screws for the bars in such a way that they do not poke through the
cabinet!
8
P1
"
21,65 B
P1
P2
min. 23,62"
"
= P1 - 23,34
= planning dimension
= planning dimension
- 23.34".
P2
- 23.34".
P1
EN
Qanto_Id_A4_00000.50.065050_US