Power Supply - Sanyo ICR-1000 Manual De Instrucciones

POWER SUPPLY

Batteries
1. Open the battery compartment lid.
2. Install two "AAA/LR03/HP16" batteries (attached). Observe proper
polarity.
1
Battery indicator (
The line of rectangles is the battery gauge. Black rectangles show the battery
condition while the unit is operating.
: Full, good condition
("LOW BATT" appears.): Weak or exhausted batteries, must be replaced.
CAUTION:
• Remove the batteries if the unit will not be used for a month or longer.
• Dispose of all used batteries safely in accordance with all applicable
laws.
WHAT TO DO IF...
If the operation of the unit or display is not
normal,
1. Open the battery compartment lid.
2. Press the RESET switch using a small ball-
point pen, etc.
3. Resume operation.
GB-5
)
[ENGLISH]
2