Basic Watch Use - Scubapro Xtender Manual Del Usuario

[D] "light/set" activates the display backlight, and during adjustments it
decreases the value you are changing
[E] wet The metallic contact on the left side of the computer is there to
contact tell Xtender that you have entered the water, and has no specifi c
function on the surface except to interface the dive computer
with a PC.

BASIC WATCH USE

When using Xtender on the surface, it will be in watch mode; it returns to this
mode after each adjustment operation and 5 minutes after the end of each dive
(Fig. 1).
day of the
week
alarm clock
icon
time
Pressing "select" will display the second time zone, desaturation time, and the
surface time.
Figure 1
month and day
hourly signal
icon
7