Dispose of the used towelette in a trash bin.
Allow exteriors to remain wet for 1 minute, then wipe the
meter using a dry cloth.
Repeat the same procedure for the
lancing device (step to step ).
NOTE
• After the pre-cleaning and disinfection procedure, the control
solution should be tested to confirm that the meter works
properly before using the meter.
• Control solution tests should be performed using ReliOn™
Premier Control Solutions.
• Verify that the test results are within the range printed on the
test strip vial.
• See page 19 for how to do a control solution test.
44
dry cloth