Battery Charging - LaserLine Cubus Manual Del Usuario

Battery charging

– Charge the device's battery
completely prior to use.
– Connect the charger to the mains
power supply and the charging
socket (G). Please only use the
charger supplied; using a different
charger will invalidate the warranty.
– When the rechargeable battery is
being charged, the LED on the
charger (H) lights up red. When the
LED changes to green, charging is complete. When the unit is not connected
to the charger the power charger's LED lamp (I) will blink.
– The battery can also be charged while using the device.
– The status indicator (4) flashes when the battery charge is low.
Insert batteries into the remote control
– Observing the correct polarity.
16
GB