Environmental Protection - Crown CT18114 Manual Original

as well as after replacing the carbon brushes� In order
to do that, use flange wrench 15 to release cap 9 (for
CT18158, CT18158V unscrew screws 28 of cover 27
and remove it), check the lubricant quantity and add
it, if needed. Greases with a boiling point over 180°С
are to be used�
[CT18123V]
The power tool lubricant quantity has to be checked on
a regular basis after every 40-50 hours of operation, as
well as after replacing the carbon brushes� In order to
do that, use Allen key 22 to release cap 9, check the
lubricant quantity and add it, if needed� Greases with a
boiling point over 180°С are to be used.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
flush the power tool with compressed air thought the
ventilation slots 10�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
The manufacturer reserves the possibility to introduce changes.
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�

Environmental protection

Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment-friendly
recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
34