Publicidad
Idiomas disponibles
Idiomas disponibles
DGEA-...-YSR
3. Fasten the shock absorber in the hole of
the shock absorber support with the aid
of the two locking nuts. At the same time
make sure that dimension s on the con-
tracted shock absorber is observed.
DGEA-...
18
25
40
4. Place the sliding blocks in the groove on
the side of the cantilever arm. By means
of a recess, sliding blocks which cannot
be clipped in by tilting, slide into the rel-
evant groove.
5. Place the DGEA-...-YSR over the sliding
blocks at the same time observing mini-
mum dimension L.
DGEA-...
18
25
40
6. Fasten the shock absorber support
together with the shock absorber with
contact to the drive head.
Festo DGEA-...-YSR 0106NH English
YSR-...
S [mm]
...-16-20-C
2
...-20-25-C
2
...-25-40-C
2
L [mm]
59
60
81
Fig. 3
Fig. 4
11
Publicidad
