Memory Effect Of Rechargeable Batteries; Installing And Removing The Belt Clip - Midland G7 Pro Manual Del Usuario

Memory effect of rechargeable batteries

Rechargeable NiMH (Nickel-Metal-Hydrate) batteries are affected by
what is known as the "memory effect". This phenomenon is associated
with a drastic reduction of battery autonomy and is triggered if the bat-
teries are regularly charged before being fully discharged and/or are not
completely recharged. To avoid the memory effect:
• When possible, recharge the batteries only when they are completely
discharged (until the device turns itself off during normal use)
• Do not disconnect the battery charger before the time indicated for a
full battery charge.
The memory effect should not be confused with the normal battery life,
which is 300-400 cycles of charge/discharge on average. It is completely
normal for operating duty to decrease when the batteries have reached
the end of their life; at this point, you will need to substitute the batteries.

Installing and removing the belt clip

With the belt clip you can easily attach
the transceiver to your belt. The clip
however, must be removed in order to
install or change the batteries. To remo-
ve the belt clip follow the indication of
picture 1. To fix the clip back to the devi-
ce slot it in the guides at the back of the
transceiver until it clicks into place.
12 |
PICTURE 1
Midland G7 Pro user's manual