Bacou-Dalloz pro ALLP tech Manual Del Usuario página 5

– R O P E A D J U S T M E N T
Keep the product clean and dry. Remove any excess moistu-
re with a clean cloth then allow to dry naturally in a warm room
away from direct heat. First rinse in clean cold water. If still
soiled wash in clean hot water, use detergents if necessary.
Thoroughly rinse in clean cold water. Clean off tar based pro-
ducts with appropriate petroleum solvents following the
instructions for use for such products. Afterwards wash, rinse
and dry as described above.
Chemicals
Avoid all contact with any chemicals which could affect the
performance of the product. These include all acids and strong
caustic substances (e.g. vehicle battery acid, bleach etc.).
Discard the product immediately if contact occurs or is even
suspected. A list of chemicals and their effect is available on
request. If used in a marine environment always thoroughly
rinse the product in clean cold water after each use.
Disinfection
Technically, a suitable disinfection is one which contains qua-
ternary ammonium compounds reinforced with chlorhexidine,
in sufficient quantities to be effective. A common example is
Savlon. Soak the product for one hour at dilution's recommen-
ded for general use, use clean water not exceeding 20°C, then
rinse thoroughly with clean cold water.
Lubrication
After cleaning and drying and before storing, metal compo-
nents, particularly those with moving parts should be lubrica-
ted sparingly using a light oil, or they may be lightly greased.
Storage
After necessary cleaning, store unpacked in a cool, dry, dark
place in a chemically neutral environment away from excessi-
ve heat or heat sources, high humidity, sharp edges, corrosi-
ves or other possible causes of damage. Do not store wet.
Where there is a need for long shelf like it is advisable to store
in a moisture proof packaging (e.g. a polythene bag) to mini-
mise oxidation. Beyond five years, sealed packaging in an
inert gas is recommended (e.g. dry nitrogen).
Transportation
Care should be taken to protect the equipment against risks
such as those detailed under Lifespan. A simple, effective way
is to transport the equipment in a suitable bag or container.
MARKINGS KEY
- Name, trade mark or any other way of identifying the
manufacturer or supplier;
- Batch or serial number,
- Year of manufacture,
- prEN xxx or EN xxx : Applicable european standard
coming under this EPI, with or without the type,
- Description of product or reference,
- Accepted rope diameter.
- Read and follow instructions before use,
- International symbol " OPEN ",
- International symbol " CLOSED".
D E V I C E S
Please note designs are being constantly updated in line with
our development programme, so may not to be precisely as
described or illustrated.
Any strengths quoted are when the product is tested new and
are in accordance with manufacturer's test methods or to the
appropriate standard. Any weights and measurements are
approximate.
Nothing in this document consumer's statutory rights.
Thank you for taking the time to read this user's guide. The
advice and instructions given are intended to be informative,
but please remember that they are not a substitute for proper
training, which the manufacturer can provide if required. If you
have any ideas how the guide or product can be improved, we
would welcome your views.
Other components of personal protective equipment against
falls from a height with which this product is used should
conform to relevant European Standards (EN's) or in their
absence other appropriate standards.
THIS DOCUMENTATION SHOULD BE ISSUED WITH AND
KEPT FOR ITEM OR SYSTEM
Tested by SGS Yarsley International certification Services Ltd
- SGS House, 217-221 London Road, Camberley, Surrey,
GU15 3EY – UNITED KINGDOM