Blaupunkt Q Serie Guía Rápida página 10

7. Operation through App
The Secure4Home App is intended to register and manage your Security System from anywhere. For
configuration please refer to chapter 10 "Operation through the Web Portal".
10
In the Security Menu
you can change the
System Modes, check
the System Dashboard
status, if there is any
Door Contact open
and if your accessories
have any fault.
If a GSM module is
installed on the panel
the signal strenght
will (see chapter 12)
be displayed at the
top right.
In the Automation
Menu you can trigger
manually any of your
scenarios, control
group accessories,
manage and use
individually all the
Home Automation
accessories and
activate or deactivate
existing rules.
In the Events Menu,
you will get an
overview of past
events. You can mail/
forward events or call
someone in order to
notify of the alarm.
All the intrusion alarms
will be displayed in
red, while technical
alerts or system
changes will be
displayed in yellow.
In the Device Menu you can have a
general overview of all the accesories,
check if there is any fault on them and if
the Door contacts are open or closed.
If one or more accessories show low
battery you should replace it so the
sytem continues working properly.
If any other supervision failiures
are displayed please follow the
troubleshooting in the manual of the
specific accessory device in the full
manual to solve the issue.
On the Cam Menu you can see the
Optional Video Survaillance WiFi Camera
(IPC-S1) and the optional PIR photo
camera (IRC-P4 or IRC-S2).
The IPC-S1 provides you a reliable
HD-quality video surveillance with
automatic video recording during
alarms, live-streaming, two-way voice
communication and night vision.
The IRC-P4 triggers an alarm when
movement is detected and captures
3 colour photos to provide visual
verification/ evidence.
If you click on the settings icon at the
top right, you can access your personal
info, modify your password, configure
notification, setup an App startup page,
bypass any accesory and find contact
support information. You can also log
out.