Maintain For Performance; Inspect The Tool Periodically; Storing - Powers Fasteners Trak-It Tool W3-21FRH Manual De Operaciones/Mantenimiento

w Install the newly charged Battery into the Housing until it has clicked.
(See Page 15 for the charging method)
e Install the Fuel Cell.
(See Page 18 for the Installation method)

7. MAINTAIN FOR PERFORMANCE

1. HANDLE THE TOOL WITH CARE
Never drop, collide or hit the tool against a hard material. It may be deformed, cracked or damaged.
2. DO NOT TRIGGER THE TOOL WITH NO NAILS LOADED
If you repeatedly operate the tool with no nails loaded, the durability of each section will be
reduced.
3. DO NOT LUBRICATE THE TOOL
Never lubricate the Tool because it will cause problems.
4.

INSPECT THE TOOL PERIODICALLY

In order to maintain the performance of the tool, clean and inspect the tool periodically. To have it
inspected, contact your nearest distributor.
5. CLEAN THE AIR FILTER
Clean the Air Filter every other day. Open the Air Filter Cover with a regular screwdriver, remove
the Air Filter from the inside and clean it with Compressed air.

8. STORING

q When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid
rust.
w Do not store the tool in a cold weather environment. Keep the tool in a warm area.
e When not in use, the tool should be stored in a warm and dry place. Keep out of reach of children.
r All quality tools will eventually require servicing or replacement of parts because of wear from
normal use.
23