Powers Fasteners Trak-It Tool W3-21FRH Manual De Operaciones/Mantenimiento página 6

Sistema de fijación impulsado por gas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

t Never use a transformer such as a booster for the power source of the charger.
Neglect of this causes a trouble or burnout of the charger.
y Never use an engine generator or DC power source to charge the Battery.
Neglect of this causes a trouble or burnout of the charger.
u Never charge the Battery in the rain or in the place exposed to water splash or moisture.
If it is charged in the wet condition, it could cause an electric shock or short-circuiting, resulting
in a fire due to burnout or combustion.
i Never touch a power plug with a wet hand.
Holding it with a wet hand could cause an electric shock.
o Never cover the charger in use with a cloth, and so on.
Putting a cover could generate the heat, resulting in a burnout or fire.
!0 Do not put the charger close to a fire.
!1 Do not charge the Battery near any combustible substance.
!2 Charge the Battery in a well-ventilated area, protected against the direct sunshine.
Charging in the direct sunshine could overheat the charger, resulting in a burnout or fire.
!3 Charge the Battery at ambient temperature of 0°C (32°F) to 40°C (104°F).
If the ambient temperature is less than 0°C (32°F) to 40°C (104°F), charging may not be
allowed, could result in a fire.
!4 Do not allow foreign objects into a ventilation hole or Battery plug socket in the charger.
They cause an electric shock or trouble. Use in the place free of dust.
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Trak-it tool w3-34cdh

Tabla de contenido