Watts MILUX RF Guía De Usuario página 4

MODES DESCRIPTION
Use (◄) & (►) keys to change the mode in the Operating mode menu. For
all operating modes the receiver switch should be placed on AUTO position.
Set CLOCK Menu :
Use this menu to adjust the clock.
GB
Use (+) & (-) to adjust the minutes.
Then press (Ok) key
Use (+) & (-) to adjust the hours.
Then press (Ok) key
Use (◄) & (►) to adjust the day.
Then press (Ok) key
COMFORT operating mode:
By pressing (+) or (-) keys the comfort temperature starts to blink and can be
adjusted.
The room temperature
The MILUX RF regulation will now follow indefinitely the comfort
temperature.
MILUX RF will follow automatically the program according to the actual time.
By pressing (+) or (-) key you can override the current set temperature until
the next change in the program.
The
required temperature.
At the next program change the
continues without any alteration.
REDUCED operating mode:
By pressing (+) or (-) keys the comfort temperature starts to blink and can be
adjusted.
The room temperature
The MILUX RF regulation will now follow indefinitely the reduced
temperature.
ANTI FREEZE operating mode :
Prevent your installation from freezing.
By pressing (+) or (-) keys the anti freeze temperature starts to blink and can
be adjusted.
The room temperature
Now the MILUX RF will keep the temperature above freezing.
reappears after a few seconds.
AUTOMATIC operating mode:
segment will lit up. Use (+) or (-) keys to adjust the temporary
reappears after a few seconds
reappears after a few seconds
will disappear and the program
4