Additional Information - Tait T2000 Serie Guia Del Usuario

Status Calls
Emergency
Operation
Despatcher
Operation
Information
codes when
making a call:

Additional Information

Status Calls permit the rapid exchange of simple
messages without voice conversation. Your radio can
have messages such as "En route" or "At lunch"
preprogrammed.
To utilise the Emergency Operation, your radio must be
connected to a hidden emergency switch, and must be
programmed to make emergency calls.
To make an emergency call, follow the steps below:
• Operate the hidden switch.
• The radio will then send a message to alert the called
party that you are in distress.
• While an emergency call is in progress, your radio will
quietly switch in and out of transmit mode so that
activity around the radio can be monitored.
• You can reset the radio yourself by switching it off and
on.
II
The T2030/35
mounted on top of its companion T2008 Power Supply
which is available separately. The radio must be
programmed to be used as a despatcher.
Codes
"0. .1" flashing
"0. . 2" flashing
"0. . 3" flashing
"0. . 4" flashing
can be used for Despatcher Operation,
T2030/35
System is busy
Call unavailable
Number unobtainable
Called party busy
II
English
15