Casals VML200 Manual Del Usuario página 4

or these instructions to operate the power tool. Pow-
er tools are dangerous in the hands of untrained users
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's op-
eration. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly main-
tained power tools
-Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control
-Use the power tool, accessories and tool bits etc
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service
-Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained
-Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
Safety warning for Sander
- Use the machine only for dry sanding. Penetration
of water into the machine increases the risk of an electric
shock.
- Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains plug
when the cable is damaged while working. Damaged
cables increase the risk of an electroc shock.
Additional safety warnings
-CAUTION: In order to prevent overheating do not cover
the appliance.
-Ensure that neither the air access nor exit become either
totally or partially covered by drapery, clothing, etc., as
this increases the risk of fire.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the ap-
pliance.
- Only use the appliance with the specific electric con-
nector provided.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if
there are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
4
- Do not use the appliance with damp hands or feet, or
when barefooted.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled
cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving parts while
it is operating.
- Do not sand any material containing asbestos. Work-
ing with asbestos and/or silica wheel, the dust produced
is harmful for health. Prevent inhalation of these types
of dust by following the appropriate health and safety
regulations.
- Protect yourself from contact with and the inhalation of
dust created by sanding wood and metal surfaces and sur-
faces coated with lead paint. Use protective equipment that
complies with the appropriate health and safety regulations.
- Exercise precaution after employing the stop operation
on the appliance as the tool will continue moving from the
effect of its own mechanical inertia.
- Fully unroll the appliance's power cable before each
use.
- Check the position of power cables before commencing
work ensuring they are well away from the work area.
- Keep hands and other body parts well away from the
work area whist the tool is in use.
- Do not use the appliance if its accessories are not prop-
erly fitted.
- Do not use the appliance if the accessories or con-
sumables attached to it are defective. Replace them
immediately.
- Disconnect the appliance from the mains when not in
use and before undertaking any cleaning task.
- Unplug the appliance from the mains before replacing
any accessory.
- This appliance is for household use only, not profes-
sional, industrial use.
- This appliance is intended for adult use. Ensure that this
product is not used by the disabled, children or people
unused to its handling.
- This appliance is not a toy. Children should be super-
vised to ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Keep the appliance in a dry, dust-free place, out of di-
rect sunlight.
- Always check the workpiece before operation and re-
move any obstructions such as nails, staples, screws,
string, rags, cloths and other debris.
- Never rest the appliance into a surface while in use.
- Do not use the appliance on any part of the body of a
person or animal.
- Let
in a s
defec
proble
and R
- App
switc
has b
tool c
- Pay
spark
vicini
- Cau
being
the d
able
metal
paper
clean
remai
mater
period
- Reg
motor
exces
electr
- Sec
clamp
by ha
Produ
Desc
1
2
3
4
5
6-
7-
8-
9-
10-
Befo
- Mak
remov
- Ens
match
applia