Casals VML200 Manual Del Usuario página 6

Once you have finished using the appliance:
- Stop the appliance using the on/off switch (1).
- Unplug the appliance from the mains.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Allow it to cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of cleanliness,
its surface may degrade and inexorably affect the
duration of the appliance's useful life and could become
unsafe to use.
Supplies
- Always use original supplies, designed specifically for
your appliance model.
- These supplies are available in specialist shops.
Anomalies and repair
- Take the appliance to an authorised technical support
service if a product damage or other problems arise. Do
not try to dismantle or repair without assistance, as this
may be dangerous.
- If the connection to the mains has been damaged, it
must be replaced and you should proceed as you would
in the case of damage.
Specifications:
- Rated power:
- Rated voltage:
- No load speed:
- Sanding pad size:
- Weight :
- Sound Pressure level (LpA) =
- Sound Power level (LwA) =
- Vibration =
6
NB: These specifications are subject to change without
notice of purpose of improvement.
NB: By virtue of the conditions of fabrication of this
product, the maximum absorbed power can differ from
that specified.
NB: By virtue of the conditions of fabrication of this
product, the maximum used power can differ from that
specified.
Wear hearing protection
-Measured sound level determined according EN60745
-The vibration emission level given in this information
sheet has been measured according EN60745 and may
be used to compare one tool with other. It may be used
for a preliminary assessment of exposure
-The vibration value during actual use of the power tool
can differ from the declared total value depending on the
way in which tool is used
-It's necessary identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance
consists are included in a collection, classification and
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
VML200
200 W
230-240 V~
12.000 /min
140x140x90
1.1 Kg
88.3 dB(A) K=3,0 dB(A)B
77.3 dB (A) K=3,0 dB(A)
11.009m/s K=1,5 m/s
2 2
- This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
- This symbol means that user must
to consult instructions thoroughly
before use.
We he
CASA
comp
60745
EN 6
Direct
Albert
Comm
Oliana