Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Connect the hot and cold supplies
Connect the hot and cold supply hoses to the
supplies. Use two wrenches, as shown in the
diagram.
Do not allow either hose to twist.
Twisting the supply hose may cause
it to loosen from the faucet, which
may cause water damage.
User instructions
The spout swivels a full 360°.
Do not swivel the spout further
than 360°, or damage to the hose
will result.
Push the handle to the right to turn the water on,
to the left to turn the water off. Swivel the handle
forward for cooler water, back for warmer water.
Press and hold the diverter to activate the spray
mode. Release the diverter to return to stream
mode.
If the flow of water decreases, remove and clean
the filter.
English
filter
diverter
5
Publicidad
Tabla de contenido
