Mounting - Atmor Enjoy Manual De Instrucciones

Mounting

01
The mounting surface
must be solid and secure.
02
The unit must be installed in an upright position with the
water inlet and outlet at the bottom.
03
The heater has two mounting options (Page 8, Figures 4 and
5) – either attach the backplate of the heater to the wall, or use
a slide wall-mount bracket. Using the backplate or the bracket
as a template, mark the mounting points on the wall.
04
Drill holes, and insert screw anchors that are suitable for screws
at least 1 inch in length.
6