6.5
General warnings and recommendations for
correct maintenance
•
Clean the filters under running water (at room temperature) using a stiff brush.
•
When removing the filter, take care that there are no food residues on it. If any
residues fall into the washing pit (ref. A fig. below), they might block hydraulic
components or clog the spray arm nozzles.
•
It is essential to thoroughly clean the filters according to the above instruc-
tions: the dishwasher cannot function if the filters are clogged.
•
Carefully replace the filters in their seats, to avoid damaging the wash pump.
Prolonged disuse
•
Run the soak program twice in succession.
•
Unplug the power cord fro the socket.
•
Leave the door slightly open in order to prevent the formation of unpleasant
odors inside the washing tank.
•
Fill the rinse-aid dispenser.
•
Shut off the water supply tap.
USER INSTRUCTIONS
EN
37