Thermador Masterpiece HDDB30WS Manual De Instrucciones página 12

Common Ducting Conigurations
RECIRCULATING MODE
A
B
NOTE: The igure does not represent all conigurations or installation methods. The image is to be used as a guide ONLY.
NOTE: Flexible duct is not recommended. Flexible
ductwork creates back pressure and air turbulence that
greatly reduce performance.
Vent system can terminate either through the roof or wall.
Always install a metal vent cover where the ductwork exits
the house.
For Non-Vented (recirculating) Installations
If it is not possible to vent cooking fumes and vapors to the
outside, this range hood can be used in the non-vented
(recirculating) version, using the recirculating kit (sold
separately). Fumes and vapors are recycled through the
grid.
See optional accessories section.
VENTING THROUGH THE WALL
B
C
VENTING THROUGH THE CEILING
D
B
Hood Transition
Vertical Discharge Transition
The hood is shipped ready for vertic
The transition supplied with the hoo
8" (200 mm) round duct. The igure shows the transition
5
(138)
19 13 ⁄ "
16
(503)
A. Air deflector
B. 8" round duct system
C. Wall Cap
D. Roof Cap
7
⁄ "
16
CL