Plumbing Installation - Tuthill FILL-RITE FR102PHU Manual Del Usaurio

Plumbing Installation

IMPORTANT! Remote dispensers and tank top pumps must be installed in accordance with
all local, state, and national electrical code NEC/ANSI/NFPA 70, NFPA 30, NFPA 30A, and
NFPA 395.
CAUTION! Threaded pipe joints and connections should be sealed with the appropriate
sealant or sealant tape to minimize the possibility of leaks.
Your Fill-Rite dispenser cabinet should be installed in a manner that does not use the plumbing to
support the cabinet in any way. Safety and Emergency equipment should be installed per local,
state, and national plumbing for flammable fuels guidelines. The following plumbing diagrams are
suggestion for typical installation scenarios.
Typical Wall Bracket Mount Plumbing
3
Item
1 Remote Pump (for use with FR102PHU, FR902DPU)
2 Electrical Conduit (Threaded rigid conduit, sealed fittings, conductor seal)
3 Wall Mounted Cabinet Dispenser (FR902DPU)
4 Fluid Inlet Pipe (Threaded pipe joints and connections should be sealed)
5 Safety Breakaway Valve
1
2
5
2
4
Description
6