Anti-Tip Bracket - Subzero ICBBI36FSPHRH Guide D’installation

SITE PREPARATION

Anti-Tip Bracket

WARNING
To prevent the unit from tipping forward, the anti-tip
brackets must be installed.
The two anti-tip brackets must be installed exactly 24"
from the front of the opening to the back of the
(610)
brackets and a minimum of 4"
opening. This depth will increase to 26
inset installation based on 3
properly position the anti-tip brackets will prevent proper
engagement.
Use all anti-tip bracket hardware as instructed for wood or
concrete floors.
For wood or concrete floor applications,
IMPORTANT NOTE:
if the #12 screws do not hit a wall stud or wall plate, use the
#8 screws and #12 washers with the wall anchors.
In some installations the subflooring or
IMPORTANT NOTE:
finished floor may necessitate angling the screws used to
fasten the anti-tip brackets to the back wall.
ANTI-TIP HARDWARE
2 Anti-tip brackets
12 #12 x 2 1 / " pan head screws
2
4 3 / "–16 x 3 3 / " wedge anchors
8 4
12 #12 flat washers
4 #8–18 x 1 1 / " truss head screws
4
4 Nylon Zip-it ® wall anchors
|
10 Sub-Zero Customer Care 800.222.7820
from the sides of the
(102)
3
/ " for a flush
(665)
16
/ " thick panels. Failure to
(19)
4
WOOD FLOOR APPLICATION
After properly locating the anti-tip brackets in the opening,
drill pilot holes 3 / " diameter maximum in the wall studs
(5)
16
or wall plate. Use the #12 screws and washers to secure the
brackets. Verify the screws penetrate through the flooring
material and into wall studs or wall plate a minimum of
. Refer to the illustration below.
(19)
CONCRETE FLOOR APPLICATION
After properly locating the anti-tip brackets in the opening,
drill pilot holes 3 / " diameter maximum in the wall studs
(5)
16
or wall plate. Drill 3 / " diameter holes into the concrete
(10)
8
a minimum of 1 1 / " deep. Use the #12 screws and
(38)
2
washers to secure the brackets to the wall, and use the
wedge anchors to secure the brackets to the floor. Verify
the screws penetrate wall studs or wall plate a minimum of
3
/ " . Refer to the illustration below.
(19)
4
24"
(610)
4"
(102)
MIN
FINISHED
FLOORING
WALL PLATE
SUBFLOORING
WOOD FLOOR
Wood floor.
3 / "
4
3 /
8
24"
(610)
4"
(102)
MIN
FINISHED FINISHED
FLOORING FLOORING
WALL PLATE
WALL PLATE
SUBFLOORING SUBFLOORING
1 1 1 1 / / " "
2 (38)
2 (38)
CONCRETE CONCRETE
min
MIN
FLOOR FLOOR
Concrete floor.
"