Selecting Languages; Adjusting The Volume - Urmet ALPHA 1168 Manual De Instalación

4 INSTALLATION AND CONNECTION TO THE DOOR UNIT
The modules must be connected by means of the three-wire audio cord provided. The ILA and voice
synthesis module Ref. 1168/48 must not be positioned after the second column of modules.
2VOICE
A A
A A
8 cm long cord provided with button module and expansion unit Ref. 1168/4 of the ILA and voice synthesis module
A
Ref. 1168/48.
B
82 cm cord provided with ILA and voice synthesis module Ref. 1168/48.
58 cm long cord provided with three or four-module frame Ref. 1168/63 or 1168/64) and of one-row casings with three
C
or four-module frame (Ref. 1168/313 or 1168/314).
5

SELECTING LANGUAGES

The language is selected by means of the rotary selector (5) in the rear part of the module (see Structure
chapter) as shown in the following table:
Rotary selector position
1
2
3
Disconnect the power from the device and reconnect it to activate the new programming.
6

ADJUSTING THE VOLUME

Volumes are calibrated by default so not to require adjustments in most cases. Use a screwdriver to adjust
the volume, if required.
7 SPECIFICATIONS
Voice message acoustic pressure.........................................................................................80 dB(A)a 10 cm
Working temperature range:....................................................................................................... -25 to +40° C
DS1168-037
C
B B
Associated language
Italian (default)
English
French
IPERCOM
A A
A A
Rotary selector position
4
5
6
C
B B
Associated language
German
Spanish
Dutch
5