Alert Test; Test Signals Broadcast By Nws; Weather Channel Frequencies - Alert Works EAR-10 Guia Del Usuario

Alert Test

:
Alert Test :
To test the alert function and ensure that it is working, press MENU
directional arrow until "ALT TEST" is displayed. Press SELECT to sound the
alert. Press the UP directional arrow to silence the alarm. Press MENU to exit.
Test Signals Broadcast by the National Weather Ser
Test Signals Broadcast by the National Weather Service
All National Weather Service stations periodically transmit test signals. You can
find out when your local NWS station broadcasts test signals by calling the
NOAA National Weather Service Forecast Office (listed under 'Weather" in the
Federal Government section of the telephone book).
During the weekly test signal, the local NWS station will give a list of counties
covered by their transmitter. The NWS test signal allows everyone with weather
radio receivers to verify the operation of their equipment.
The following test signals may be sent by the NWS during testing: required weekly
test, required monthly test, system demo, and national periodic test.
During a test, the yellow advisory LED will illuminate and the test message will be
visible on the display. The weather radio will not sound an audible alert or tone
alert during this periodic NWS test.

Weather Channel Frequencies

Weather Channel Frequencies
Channels preset
on Weather
Monitor
You can find more information on weather frequency channels on the Internet
website of National Weather Radio at www.nws.noaa.gov/nwr/indexnw.htm.
:
:
Broadcast
Frequency
(MHz)
1 162.400
2 162.425
3 162.450
4 162.475
5 162.500
6 162.525
7 162.550
,
then the UP
vic e :
:
12