Any" S.a.m.e. County Codes Is Factory Default; To Program A Single S.a.m.e. County Code; To Program Multiple S.a.m.e. County Codes - Alert Works EAR-10 Guia Del Usuario

Programming S.A.M.E. County Codes
Programming S.A.M.E. County Codes
Default Factory Setting of S.A.M.E. County Codes:
Your Alert Works EAR-10 Emergency Alert Weather Radio comes preprogrammed
to receive NWS weather and hazard alert transmissions for all S.A.M.E. county
codes within range. If this is what you want, leave the radio set to "ANY."

To Program a Single S.A.M.E. County Code:

 Press MENU button to open menu options.
 Press UP directional arrow to scroll through menu options until "S.A.M.E.
SET" is displayed; then press SELECT.
 Press UP directional arrow to scroll through "SINGLE", "MULTIPLE", or
"ANY."
 Display "SINGLE," then press SELECT. "S.A.M.E. 01" will be displayed.
(Note if you are programming a single S.A.M.E. county code, only the "01"
setting will be used.)
 Press SELECT. Using the UP directional arrow, find the first digit of your
S.A.M.E. county code. Press RIGHT directional arrow to save the digit
and automatically advance to the next digit.
 Program all digits of your S.A.M.E. county code in the same way.
 Press SELECT to store your S.A.M.E. county code. Press MENU to close
the programming menu.

To Program Multiple S.A.M.E. County Codes:

 Press MENU to open menu options.
 Press UP directional arrow to scroll through menu options until "S.A.M.E.
SET" is displayed; then press SELECT.
 Press UP directional arrow to scroll through "SINGLE", "MULTIPLE", or
"ANY."
 Display "MULTIPLE" to enter more than one S.A.M.E. county code.
"S.A.M.E. 01" will be displayed, indicating you will be programming your
first S.A.M.E. county code at weather radio menu location "01."
 After programming your first S.A.M.E. county code, press SELECT, then
the UP directional arrow to advance to "S.A.M.E. 02." Program all of your
S.A.M.E. county codes in the same way.
8