Worx WA3847 Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

11. disconnect battery charger from
the power supply when not in use.
This will reduce the risk of electric shock
or damage if metal items should fall into
the opening in the charging stand. It also
will help prevent damage during a power
surge.
12. risk of electric shock. do not touch
un-insulated portion of output connector
or un-insulated battery terminal.
13. iNdoor USE – Use in an indoor
location or where wet contact is not
likely to occur.
14. Save these instructions. Refer to them
frequently and use them to instruct others
who may use this battery charger. If you
loan someone this battery charger, loan
them these instructions also to prevent
misuse of the product and possible injury.
6
table 1 Minimum gage for cord
ampere
More than
0
6
10
12
Battery Charger
rating
Not More than
6
10
12
16
SYMBOLS
EXtENSioN CordS
USE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition.
When using an extension cord, be sure to use
one heavy enough to carry the current your
product will draw. An undersized cord will
cause a drop in line voltage resulting in loss
of power and overheating. Table 1 shows the
correct size to use depending on cord length
and nameplate ampere rating. If in doubt, use
the next heavier gage. The smaller the gage
number, the heavier the cord.
Volts
total length of cord in feet
120V
25ft.
240V
50ft.
18
18
16
14
Before charging, read the
instruction manual
Warning
Indoor use only
Double insulation
50ft.
100ft.
100ft.
200ft.
aWg
16
16
16
14
16
14
12
Not Recommended
150ft.
300ft.
14
12
12
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido