Fitting The Wall Storage Rack - Euroflex Monster SC60 Superclean Manual De Instrucciones

Fitting The Wall Storage Rack

The wall storage rack can be permanently fitted to a wall or inside a cupboard. Slots on the un-
derside of the tool caddy locate on to hooks in the wall rack giving you an easy method of storing
your steam cleaner neatly away without taking up floor space.
Please note
The tool caddy must be fitted to the Monster 60 SuperClean before the wall storage rack can
be used.
Important Safety Message
When storing your Monster 60 SuperClean on the wall rack, ensure that any tools and accessories
in the tool caddy are not in a dangerous position. In particular the extension tubes could be a
hazard if the rack is situated at eye level.
1. Select your site for the wall rack. Check that there is room for the steam cleaner in the position
you choose and that it will not obstruct doorways or access to other items stored near by. The
cleaner drops down on to the rack so you will need to site the wall rack with at least 6.5 cm (2
_ ins) clearance above it. Be certain that the surface you are fixing to is sound an capable of
bearing the weight .
2. Hold the wall rack in the correct position (ensuring that it is level – we recommend you to use a
spirit level), and using the rack as a template mark the screw hole positions with a pencil.
3. Use the correct fixing for the surface you are fixing to according to the manufacturers instruc-
tions. A wide range of fixings is available from your local hardware store.
4. Screw the wall rack in place using round head or pan head screws of the correct size for the
fixing method you are using.
31