Using Hard Reset; Connecting To Wi-Fi Networks - LG P990 Guia Del Usuario

forgot it, you need to perform a
factory reset.

5. Using hard reset

If it does not restore to the
original condition, use Hard Reset
(Factory Reset) to initialise your
phone.
When the phone is turned off,
press and hold the Power +
Volume down keys at the same
time (for over ten seconds), the
phone will turn on and perform
factory reset immediately.
Please note, after you perform
Hard Reset, all your data and
applications on your phone will be
erased. This cannot be reversed.
WARNING
If you perform Hard Reset, all
user applications, user data and
DRM license will be deleted.
Please remember to back up any
important data before performing a
Hard Reset.
6. Connecting to Wi-Fi
networks
To use Wi-Fi on your phone, you
need to access a wireless access
point or "hotspot." Some access
points are open and you can
simply connect to them. Others
are hidden or implement other
security features, so you must
configure your phone to connect
to them.
Turn off Wi-Fi when you're not
using it to extend the life of your
battery.
To turn Wi-Fi on and connect to
a Wi-Fi network:
1 On the home screen, touch
Applications tab
select Settings > Wireless &
networks > Wi-Fi settings.
2 Touch Wi-Fi to turn it on and
begin scanning for available
Wi-Fi networks.
and
11