Xylem SI Analytics LF 413T IDS Manual De Instrucciones página 38

Technical data
Connection cable
Pressure
resistance
Measurement
conditions
Storage conditions
Characteristic data
on delivery
8
Thermistor enclosure
Lengths
Diameter
Smallest allowed
bend radius
Plug type
Sensor with connection
cable
Cable plug
The LF 413T IDS meets the requirements according to article 3(3) of the
directive, 97/23/EC ("pressure equipment directive").
Conductivity measuring
range
Temperature range
Max. admissible overpres-
sure
Minimum depth of immer-
sion
Maximum depth of immer-
sion
(at temperature)
Operating position
Recommended storing
method
Storage temperature
Temperature responding
behavior
Accuracy of the temperature
sensor
Graphite
1,5 m LF413T IDS)
3 m LF413T 3M IDS)
4.3 mm
Fixed installation:20 mm
Flexible use:60 mm
Socket, 4 pins
5
IP 68 (2.5 x 10 Pa or 2.5 bar)
IP 67 (when plugged in)
1 S/cm ... 2 S/cm
-5 ... 70 °C (100 °C) (23 ... 158 °F (212 °F))
LF 413T IDS:2,5 x 10
36 mm
Whole sensor + cable up to 70 °C (158 °F)
Sensor shaft only (=120 mm) up to 100 °C
(212 °F)
Any
In air
0 ... 50 °C
t (99 % of the final value display after)
99
< 20 s
± 0,2 K
LF 413T IDS
5
Pa (2,5 bar)
ba77043d02 10/2015