Carbon Dust Filter
We recommend changing this filter after
three bag replacements. for the GX series,
the integrated monitor will indicate when
to change the filter. these indications are
provided by an electronic timing board, only
as a reference guide.
to do so:
1. unlatch the opening on the carbon filter
case and gently flip it upward (figure 19).
2. remove the used filter, and discard
(figure 20).
3. Insert the new filter. When doing so,
please ensure that the arrow printed on
the filter itself points outwards. (figure21).
4. close casing opening, and latch.
Ultra-Fresh* Permanent Filter
this drum-shaped filter requires no maintenance. It will be checked by the service
center when you have the vacuum power unit inspected, after approximately 500
hours of use (around 10 years, depending on use).
* ultra-fresh is a trademark of thomson research associates
figure 21
Maintenance
(Patent pending)
figure 19
figure 20
25