CycloVac GS Serie El Manual Del Propietario página 28

Troubleshooting
p
robleM
Decrease in suction
strength (cont.)
If none of these suggestions restore suction strength, contact your authorized
28
p
ossIble cause
obstruction in the piping
system
service center.
troubleshooting
c
orrectIVe actIon
remove the screw from
the air intake connector,
to free the central
vacuum unit from the
piping system (see figure
3 on page 8). Start the
unit by plugging the
hose into a vacuum
inlet. By placing your
extended hand over the
air intake opening on the
unit, check the suction
strength on the unit itself.
If suction strength is
normal, the obstruction
is in the piping system.
If suction strength is
diminished or completely
absent, have the unit
checked by an authorized
service center.