ION PROJECT ROCKER Guia De Inicio Rapido página 6

6. Bass Boost: Press this button to enhance the overall bass frequency response.
7. Tune/Track Buttons (</>): Tap these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. To "seek" (jump to the next available
station), hold either button down for a few seconds until it starts to seek a station. The unit
will remember the last station it was on and start at that station when powered off and on
again.
8. Play/Pause: Press to play or pause a track from a connected Bluetooth device. Press and
hold this button to select a previously saved preset station. See the section
Radio for more details on saving and recalling presets.
9. Master Volume Control: This adjusts the speaker's main mix volume, which includes the
Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
10. Auxiliary Input: This stereo 1/8" (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
11. USB Charging Port: Connect your device's charge cable here to charge it. USB charging
only functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
Top Panel
1. NFC: Tap your NFC (near-field communication) supported and enabled device
here to pair your phone by gently bumping on the 'N' logo.
2. Mechanical Features: Use this panel to hold drill bits/screws/parts, imperial and metric
rulers, a protractor, and a socket tray.
Rear Panel
1. Power Cable Input: Insert the included power cable here to charge the unit.
Note that the Project Rocker can be used with the power cable while it
simultaneously charges the battery.
Side Panels
1. Storage Pouches: Use these pouches for holding tools.
6
Using the