Crevice Tool - Kenmore 116.21714 Manual De Uso Y Cuidado

COMBINATION BRUSH
The combination brush uses two tools, the
dusting brush and the pet tool. Each is for
use on various surfaces. See ATTACHMENT
USETABLE (page 17).
To remove dusting
brush or pet tool,
release by
pressing tab and
lifting off the
holder.
- Dvsfing ....
Brush "/rloiaer
Tob
Tool j _
_v
,J
To attach,insert
tab on holder
into slot on
dusting brush or
pet tool and
press until tab
snaps into place.
When stored, the brush shield can be slid
over the brush.
CREVICE TOOL
To attach the crevice tool to the handle:
1. Place the
round end of
the crevice tool
onto the tab on
the handle as
shown.
2. Align the slot on the flat end of crevice
tool with the tab on the handle.
3. Press the crevice tool onto the handle
until the crevice tool snaps into place.
-16-