Dirt Sensor - Kenmore 116.21714 Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DIRT SENSOR
Although
the dirt sensor feature
in your
I<enmore
PowerMate
® is designed
for
years of trouble
free use, the passage
of
dirt through
the air passage
system can
coat
the lenses causing
the green
light to
come on and stay on - never switching
to
red. When
this happens
the lenses must
be cleaned,
CAUTION
_ _r[w__Never
use water
or any cleaning solution
when cleaning the lenses. The residue of
the water or cleaners will accelerate
the
recoatlng of the lenses and make cleaning
TO CLEAN THE LENSES
1. Remove
the wand from
the PowerMate
by pressing the quick
release
pedal
and
lifting up on the wand.
Wo nd
Quick
Release
Pedal--
2. As indicated
by the illustration,
the two
dirt sensor elements
are located
on the
inside of the swivel,
approximately
4
inches/]O
cm down,
(note the arrows).
Each element
should
be cleaned
periodi-
cally. To reach the sensor elements,
use a
small
brush such as a bottle brush. Brush
each sensor element
several
times to
remove dust and dirt.
Cross Section
View
2. Reinstall
the wand after
cleaning
the
sensors.
=27 =

Publicidad

Tabla de contenido
loading

Tabla de contenido