BULB CHANGING
WARNING
Electrical
Shack Or Personal
Injury
Hazard
Turn off and unplug
vacuum
cleaner
before
performing
maintenance
to the
vacuum
cleaner.
Failure to do so could
result in electrical
shock or personal
injury
from the vacuum
cleaner
suddenly
starting.
c uTio.
Do not plug in or turn on until the vacuum
NOTE: Use replacement
bulb number
20-5248,
see part number detail in
REPLACEMENT
PARTS (page 5).
1. Turn off and unplug vacuum cleaner
from
electrical
outlet.
FSaf
Screwdriver
Slots
ght
Lens
'2. Pry light
lens out at
slots as shown
on both sides.
Rotate
lens up
and lift off.
3. Remove
the
light
bulb by
pulling straight
out.
_
CAUTION
Do not use a bulb rated over 9W
(13V). During
extended
use, heat from
the bulb could overheat
surrounding
plastic parts.
4. To replace the
light bulb, carefully
insert fully into slot.
5. To replace
light
lens, place tab at
front of lens into slot.
6. Rotate
lens down
and firmly
snap into
place.
- 26 -