Getting Started; Assembly; Key Functions - Klarstein Arizona Jerky Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
18

GETTING STARTED

Before first Use
• Remove any packing from the product. Place the packing inside the box and either
store or dispose of responsibly.
Cleaning
• Before using the first time, wipe all parts of the appliance. Clean the 6 trays,
damper door and slag pans with a lightly moistened cloth. Use detergent as
needed. Don't put the main engine into water or other liquids!
• After cleaning, the unit must be run for 30 minutes without placing any food for
drying during this period. Any smoke or smells produced during this procedure are
normal. Please ensure sufficient ventilation. After the running in period, rinse the
racks in water and dry all parts. This act is only necessary for the first time, but don't
put the main engine into water or other liquids
• Unplug the dehydrator from the power supply and let it cool down before cleaning.
Use a soft brush to remove food sticking. Dry all parts before storing the dehydrator.
• Do not clean the appliance with aggressive chemicals or abrasives in order not to
damage the surface.

ASSEMBLY

• Make sure that the dehydrator on a level surface.
• Stock the drying trays and connect the plug with a wall socket. The dehydrator is
now ready for use.

KEY FUNCTIONS

Function buttons as below:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10033020

Tabla de contenido