Assembly / Disassembly - Thrustmaster T500RS Manual De Instrucciones

ASSEMBLY /
DISASSEMBLY
To tighten:
Screw
anti-
clockwise
To loosen:
Unscrew
clockwise
Attaching the steering wheel and pedal set to a cockpit
1. Place the steering wheel on the Cockpit's tablet.
2. Tighten 2 "M6" screws (not supplied) into the Cockpit table and into the 2 small screw threads
under the wheel.
Important note for the Wheel: These screws must not be longer than 12mm to avoid damaging
the components inside the base.
3. If necessary, screw in the standard clamping system (into the large screw thread).
4. In the same way, attach the Pedal set using the small screw threads underneath it.
Note for the Pedal set: In certain cockpits the "Floor position" (F1 type) will be more user-friendly.
On others the "Suspended position (GT/Rally type)" will be more comfortable.
Do not hesitate to test the different possible settings for more comfort.
8/22