Thrustmaster T500RS Manual De Instrucciones página 472

INSTALLATION ON PLAYSTATION®3
1. Connect the pedal set to the steering wheel by plugging in its connector (11) at the back of the
wheel.
2. Connect the power adapter to the wheel (13) by plugging in its connector to the back of the
wheel.
3. Connect the power adapter to its power adapter cable (14).
Note: To be sure that the 2 elements are perfectly connected, push the cable's connector into the
power adapter socket firmly.
4. Connect the power adapter cable (14) to a socket.
5. Connect the wheel's USB connector (12) to the console's No. 1 port.
You are now ready to play!
PLAYSTATION®3 GAMES COMPATIBILITY MODE
Your racing wheel has 2 modes in order to ensure compatibility with all PlayStation®3
games:
- "Force Feedback" mode
- "Emulation" mode
"FORCE FEEDBACK" MODE
- The wheel calibrates itself at game's start = your racing wheel automatically switches to "Force
Feedback" mode.
- In this case, the games (for example GRAN TURISMO®) use the racing wheel's SDK (Software
Development Kit) to configure the wheel and manage the Force Feedback effects.
- In these games, the T500 RS is recognized as a real racing wheel.
"EMULATION" MODE
- The wheel does not calibrate itself at game's start = your racing wheel automatically switches to
"Emulation" mode.
- In this case, the games do not use the wheel's SDK. Therefore, the wheel only uses the automatic
return to center function, not the Force Feedback function.
- In these games, the T500 RS emulates the official PlayStation®3 gamepad.
- Accelerator = R2 trigger on the gamepad
- Brake = L2 trigger on the gamepad
(if necessary, access your game's "Options/Controls/Controller" interface to configure your racing
wheel).
- Clutch pedal = not functional.
- Wheel rotation angle = 270°
9/22